Automotive interior products-Hot nozzel x single.

Short Description:

1.2343 ESU, Hardened HRC 48-52, HASCO standard components, LKM moldbase Automatic part falling running.Safety requirements. High-speed CNC milling process on Cavity & core blocks to get good surfaces. Different hardness between cavity and sliders , tolerance HRC 5. Metric type screw.

Usage: Automotive interior plastic parts

Mold type: Thermoplastic injection

Raw material: PC+ABS

Cavity No.: 1 Cav.

Demold mechanism: Slider is actuated by angular pillar pins. HASCO pin.

Mold material: 1.2343 ESR 48-52 HRC, A/B plate, 1.2311, Mold base LKM

Mold size: L400xW400xH451mm,

Send email to us

Product Detail

Product Tags

SPECIFICATION
Usage	Automotive interior plastic parts
Mold type	Thermoplastic injection
Raw material	PC+ABS
Finishing	Polishing A1, core side 600# sand paper.
Cavity No.	1 Cav.
Construction	2-plate mold with 2x Sliders
Demold mechanism	Slider is actuated by angular pillar pins. HASCO pin.
Injection	Hot nozzel transfers to Cold runner by subgate.
Mold material	1.2343 ESR 48-52 HRC, A/B plate, 1.2311, Mold base LKM
Mold size	L400xW400xH451mm,
Components	HASCO standard, water connector, Z81/9/R1/4
Machine Tonnage	M/C 120 Tonnage
Cycle time	28 sec, mold temperature 60°C.
Mold lifetime	1,000,000 shots
FA lead-time	7 weeks from order released
Delivery time	14 weeks since order placed.
One of NEOK's business is injection mold making on the guide lines of as followed, Mold identification Tag. Pocket for mold identification Tag. Mold painting. Mold Base Design and Eyebolt Guides and Interlocks. Safety requirements. Cooling system (Manifold and water connections). Hydraulic Manifold and connectors. Hot runner plug and connections design. Micro switch connections design. Ejection system. Standards components. Mold Design CAD files. Engineers & mold designers are qualifed on mold specification trainings. hot manifold injection mold or hot runner system mold A cooling system is required for the mold. This consists of an external pump connected to passageways in the mold, through which water is circulated to remove heat from the hot plastic. They not only design mold according to customer's specification ,but also present good suggestion to customers during mold design. Project Engineers serve customer at one-station from order to mold delivery. Weekly progress report is a regular job. NEOK TECH promise good service to your tooling demand, including prototype injection mold and injection prototype mold, etc. Sincerely yours!