Automotive interior products-2K injection mold with hot runner system.

Short Description:

Automotive mold for automotive interior mold, Tonnage-"HASCO standard ejector pins ,plastic is PC+ABS, a,Material/steel were hardened by vacuum heat treatment 48-52 HRC. LKM standard mold base,. Dowel pin is installed in wear plates of sliders.Water tunnel directly through the cavity block.

Usage: Automotive interior products

Mold type: Thermoplastic injection mold

Raw material: PC+ABS

Cavity No.: 1 CAV.

Demold mechanism: Slider is actuated by angular pillar pins.

Mold material: 1.2343 ESR 48-52 HRC, A/B plate, 1.2311,LKM Mold base

Mold size: L450xW350xH476mm,

Send email to us

Product Detail

Product Tags

SPECIFICATION
Usage	Automotive interior products
Mold type	Thermoplastic injection mold
Raw material	PC+ABS
Finishing	Polishing A1, core side 600# sand paper.
Cavity No.	1 CAV.
Construction	2-plate type mold with Slider
Demold mechanism	Slider is actuated by angular pillar pins.
Injection	Hot runner transfers to Cold runner by subgate.
Mold material	1.2343 ESR 48-52 HRC, A/B plate, 1.2311,LKM Mold base
Mold size	L450xW350xH476mm,
Components	HASCO standard EQV
Machine Tonnage	M/C 200 Tonnage
Cycle time	30 sec, mold temperature 52°C.
Mold lifetime	1,000,000 shots
FA lead-time	9 weeks from order released
Delivery time	17 weeks since order placed.
Automotive-part mold for automotive interior products. Material of A/B plates is selected 1.2312 pre-hardened 26~28.5 HRC. Mold liffe cycle =1 million of serial production. Hot runner system injection mold, The mold hot runner solution is Synventive hot runner system.. Material/steel were treated by vacuum heat treatment .The correct heat treating process is important to steel working characters, not just result of final hardness value. Regarding to long time molding production, correct processing in heating steel is basic quality control. Ejection pins were marked with consecutive numbers . For the curves surfaces, the end of pin is cut to form a locating flat. The mold were trialed by 3 times before delivery to Germany. NEOK's trial times allowed is 3 times as a demand, in advance of trial of every time, engineer checks or prepare relevant thing on all respect. during mold test, keeping test record of suitable parameters is a must, and double-checking setting-up parameters to datasheet. 5 hours pilot of molding aims production validity before mold delivery. QC team and exclusive engineer checked details of the complete mold, all components, critical dimension measurement like locating ring, interlocks fitting tolerance etc, including spare parts to be shipped with mold. China low-cost thermoplastic injection mold also means quality. Hope NEOK to be your exclusive mold maker in Asia on the condition of engineering capability.Special service for Automotive injection mould. Sincerely yours ! Welcome your warming idea.