Automotive interior products-2K injection mold with hot runner system.

Short Description:

Automotive mold for automotive interior 2K mold. Tonnage-"L" type double injection machine.DME standard ejector pins is with 2 groups of ejection plates.Core side rotates and cavity side is fixed. Hard plastic is ABS, and soft plastic is TPE,Shore A 60,Material/steel were hardened by vacuum heat treatment 48-52 HRC. LKM mold base.

Usage: Products of Automotive interior

Mold type: Thermoplastic injection mold

Raw material: PC+ABS

Cavity No.: 1 Cav.

Demold mechanism: 4 Sliders by angular pillar pins.

Mold material: 1.2343 ESR 48-52 HRC, A/B plate of 1.2311, Mold base LKM

Mold size: L450xW350xH476mm,

Send email to us

Product Detail

Product Tags

SPECIFICATION
Usage	Products of Automotive interior
Mold type	Thermoplastic injection mold
Raw material	PC+ABS
Finishing	Polishing A1, core side by sand paper 600# .
Cavity No.	1 Cav.
Construction	2-plate mold with Slider
Demold mechanism	4 Sliders by angular pillar pins.
Injection	Hot runner transfers to Cold runner by subgate.
Mold material	1.2343 ESR 48-52 HRC, A/B plate of 1.2311, Mold base LKM
Mold size	L450xW350xH476mm,
Components	HASCO standard watering connectors.
Machine Tonnage	M/C 180T
Cycle time	28 sec, mold temperature 58°C.
Mold lifetime	1,000,000 shots
FA lead-time	8 weeks after order released
Delivery time	16 weeks since order placed.
The mirror surface grinding spare part was polished by manual to get good surfaces Ra 0.2. The 4 corners of plates exists supporting plate to balance A and B plates while mold is closed. Simplifed Racket of slider cylinder to improve the size of mold during mold design. NEOK TECHNOLOGY is an Asia injection mold manufacturer, engaged in Automotive injection mould Automotive interior product mold praezisionswerkzeuge electrical part mold automotive upholstery injection mold POS machines mold Printer component mold bureautique mould office automation mould OA plastic part mold, etc. Low-cost and quality with soonest leadtime. 5 hours of pilot is to be run before mold delivery. Customer can provide material and masterbatch for molding and the molded parts NEOK can send free excluding freight. A soft rapid-prototype mold with low cost if necessary ahead of series mold building. That means "prototype mold". HASCO Standard components and the relevent process on moldbase, it is easy for customer to repair mold at maintainance. Mit herzlichen Grüßen! Sales Dept.