Precision Slider machined Automative mold

Short Description:

1.2767 Hardened, vacuum heat treated to HRC 48-52,. Good fitting to core and cavity block. Welding were forbidden to get good quality and appearance. Non-manual grinding job by hand. QC-reports were provided with key dimension within tolerance +/-0.02mm inspected by 2.5D projector instruments. leadtime in time and quality with economic cost.

Usage: Precision_Slider_machined_for precision Automative components

Mold type: Thermoplastic injection mold

Raw material: PC+ABS

Cavity No.: 2+2 Cav.

Demold mechanism: /

Mold material: 1.2767 Hardened HRC48-52.

Mold size: Core set, L450xW350xH180mm,

Send email to us

Product Detail

Product Tags

SPECIFICATION
Usage	Precision_Slider_machined_for precision Automative components
Mold type	Thermoplastic injection mold
Raw material	PC+ABS
Finishing	Polishing A1, 600# sand paper.on core side.
Cavity No.	2+2 Cav.
Construction	2-plate mold x 6 Sliders
Demold mechanism	/
Injection	/
Mold material	1.2767 Hardened HRC48-52.
Mold size	Core set, L450xW350xH180mm,
Components	HASCO standard, Z81/9/R1/4
Machine Tonnage	M/C 150 Tonnage
Cycle time	/
Mold lifetime	1,000,000 shots
FA lead-time	/
Delivery time	20 days
High precision slider manufacuturing and fabrication. Material 1.2767 hardened to HRC 48-52 by vacuum, Any re-adjustment of fitting to core were re-worked by CNC or EDM machines.and then bench worder fit the sliders well to core and cavity blocks.No flash on parting line and at the same time to keep good parts measurements. Hardness is less than core & cavity's, at HRC 5 to avoid of galling after many times of sliding. Good qualtiy and good apprearance on surfaces. welding is forbidden as well as not by manual grinding job. Labeling part number and hardenss on parts'by engraving. QC reports were completed by 2.5 projector insturement of accuracy +/-0.002mm. comparing process tolerance +/-0.015mm. high precision injection molding customized mechanical parts machinery repair part EDM machined spare parts DLC coating machined spare parts automotive interior accessories auto parts injection molding injection molding IML/IMD Pet Film molding low to medium volume insert molding injection molding production Inquiry services on 24-hour service, Please not hesitate to contact NEOK's Team. Any inquiry please provide 2D or 3D drawings, format, .dwg, dxf. x_t, stp. Sincerely yours!