Home Appliance Coffe Machine injection mold

Short Description:

Material SAN clear (transparent). 0.5 degree draft on side walls. Good parting line matching on sufaces, S136 steel hardened to HRC 46-50. Mirror fine polishing. Extra interlocks between sliders to get good matching on parting line. Times of adjustment of polishing was completed on mold trial by manual.lower holding press decreased deformation of core inserts while molding.

Usage: House_Appliance_Coffe_Machine_Tank.

Mold type: Thermoplastic injection mold

Raw material: SAN clear

Cavity No.: 1 Cav.

Demold mechanism: Stripper plate under the bottom of part

Mold material: S136H 46-50 HRC, A/B plate, 1.2311, Mold base at standard LKM

Mold size: L500xW500xH650mm,

Send email to us

Product Detail

Product Tags

SPECIFICATION
Usage	House_Appliance_Coffe_Machine_Tank.
Mold type	Thermoplastic injection mold
Raw material	SAN clear
Finishing	Polishing A3,
Cavity No.	1 Cav.
Construction	2-plate mold with huge Slider
Demold mechanism	Stripper plate under the bottom of part
Injection	Hot runner transfers to Cold subgate x 1 gate
Mold material	S136H 46-50 HRC, A/B plate, 1.2311, Mold base at standard LKM
Mold size	L500xW500xH650mm,
Components	HASCO standard, Z81/9/R1/4
Machine Tonnage	M/C 180 Tonnage
Cycle time	56 sec, mold temperature 60°C.
Mold lifetime	1,000,000 shots
FA lead-time	8 weeks from order released
Delivery time	17 weeks since order placed.
0.5 degree of draft on side wall. It took good mirror polishing to avoid of scretching on surface. The most important job is to get good quality appearance and parting lne matching. Stripper plate's ejecting should be on balance as a whole flatness due to 0.5 degree of draft. otherwise, scretches on surfaces.Mirror polishing on core and sliders. Any scretching on trial was resolved in press by manual polishing times to times till good results. Small holding press is to keep good appearance without scretching on surface. NEOK's Team also took lots of efforts to solve the uneven thickness of walls on different sides. High injection press let the core inserts deformed on the condition of only one injection gate. Engineers & mold designers are qualifed to solve any issue happened on mold trials if beyond forecast, Project Engineers serve customer at one-station from order to mold delivery. Weekly progress report is to prepared by project engineer who is responsible of the project. 5 to 10 samples free after every mold trial is sent to customer's review. Before mold building knock-out, professional DFM is submited to customer for approval. mold supplier in China mold & Die made in China injection mold imported from china mould and mold made in China mold & Die made in China thermoplastic injection molding supplier 24_hour service is being on looking forward to precious inquiry. the corresponding offer is to be submited with 24 hours. With many thanks! Sales'Dept.