Automotive interior products-hot nozzel, HASCO standard.LKM mold base.

Short Description:

High precision injection mold with low-cost,quality and on-time delivery.1.2343 ESU Hardened steel HRC48-52, cycle time 32 sec. Smooth automatic running, moldlife 1 million shots.All ejection pins HASCO standard. Guided ejection group plates.Dowel guide tube on spacer blocks.Delivery time 4 months.

Usage: Automotive interior products Door arm's racket.

Mold type: Thermoplastic hot runner injection mold

Raw material: PC+ABS

Cavity No.: 1 Cav.

Demold mechanism: Sliders, ejectors,and lifters.

Mold material: 1.2343 ESR 48-52 HRC, A/B plate, 1.2312, LKM moldframe.

Mold size: L450xW350xH476mm,

Send email to us

Product Detail

Product Tags

SPECIFICATION
Usage	Automotive interior products Door arm's racket.
Mold type	Thermoplastic hot runner injection mold
Raw material	PC+ABS
Finishing	Polishing A1, core side 600# sand paper.
Cavity No.	1 Cav.
Construction	2-plate mold with Slider,and angular lifters.
Demold mechanism	Sliders, ejectors,and lifters.
Injection	Hot nozzel trans to Cold subgate..
Mold material	1.2343 ESR 48-52 HRC, A/B plate, 1.2312, LKM moldframe.
Mold size	L450xW350xH476mm,
Components	HASCO standard, Z81/9/R1/4 water jig.
Machine Tonnage	M/C 200 Tonnage
Cycle time	32 sec, mold temperature 60°C.
Mold lifetime	1,000,000 shots
FA lead-time	8 weeks to T1 trial.
Delivery time	16 weeks to mold delivery.
The mold was very high precisely processed for overease's order to Europe customer. A precision injection mold. No flash on parting line, not dent on bottom, not scretch line on side wall. Automatic running is smooth. Efficient supporting wear plate on parting line, material 1.2510 HRC 58~62 to balance A/B plates. Parting line interlocks to anti unbalance from single side slider. Spry bar slot on 4 corners of each mold plate. HASCO standard, Z81/9/R1/4 water jig to quick dismounting water line. mold cores tooling and mold cavity tooling were milled by CNC high-speed milling, it was easy to fit core to cavity block and slider. All parts were measured by CMM within tolerance +/-0.02mm. China thermoplastic injection mould is low cost Chinese mold but with quality. Delivery time is 25 days at Min.if project is urgent. Mirror surface polishing electropolishing is to be based on mirror-EDM processing, Ra0.028 and the manual polishing to Ra0.02. Moldbase precision-tooling was after moldbase arrived home to fit cavity & core blocks with tolerance +/-0.02mm. All thru-holes for ejector pins were processed by precision Wire-ctting with tolerance +0.01/0 mm. NEOK's mold team have rich experience in plastic injection mold making service, with LKM, HASCO or DME standard as well as Specification of Customer requirement. 90% of mold exports to Euro and North America. NEOK TECH provides low-cost , quality injection mold & molding service and qualifed mold & project engineers provides professional engineering job to customers. NEOK's team is looking forward to your precious order. any inquiry is welcomed at 24-hour service. Sincerely yours!