Automotive interior products-injection mold with hot nozzel.

Short Description:

HASCO Standard components, including parting line interlocks, water connectors, ejection pins,Z81/9/R1/4 . Hardened ejection pins and guided ejection plates set.Processing period 30 days for T1 trial. Mold specification was according to customer's demand. Gate is demolded clear.

Usage: Automotive interior products

Mold type: Thermoplastic injection mold

Raw material: PC+ABS

Cavity No.: 1 Cav.

Demold mechanism: Slider is actuated by angular pillar pins.

Mold material: 1.2343 ESR 48-52 HRC, A/B plate, 1.2311, Mold base LKM

Mold size: L450xW350xH476mm,

Send email to us

Product Detail

Product Tags

SPECIFICATION
Usage	Automotive interior products
Mold type	Thermoplastic injection mold
Raw material	PC+ABS
Finishing	Polishing A1, core side 600# sand paper.
Cavity No.	1 Cav.
Construction	2-plate mold with Slider
Demold mechanism	Slider is actuated by angular pillar pins.
Injection	Hot runner transfers to Cold runner by subgate.
Mold material	1.2343 ESR 48-52 HRC, A/B plate, 1.2311, Mold base LKM
Mold size	L450xW350xH476mm,
Components	HASCO standard, Z81/9/R1/4
Machine Tonnage	M/C 180 Tonnage
Cycle time	30 sec, mold temperature 60°C.
Mold lifetime	1,000,000 shots
FA lead-time	8 weeks from order released
Delivery time	16 weeks since order placed.
One of NEOK's business is injection mold making on the guide lines of as followed, 1. Mold identification Tag. 2. Pocket for mold identification Tag. 3. Mold painting. 4. Mold Base Design and Eyebolt 5. Guides and Interlocks. 6. Safety requirements. 7. Cooling system (Manifold and water connections). 8. Hydraulic Manifold and connectors. 9. Hot runner plug and connections design. 10. Micro switch connections design. 11. Ejection system. 12. Standards components. 13. Mold Design CAD files. Engineers & mold designers are qualifed on mold specification trainings. They not only design mold according to customer's specification ,but also present good suggestion to customers during mold design. Project Engineers serve customer at one-station from order to mold delivery. Weekly progress report is a regular job. 5 to 10 samples free after every mold trial is sent to customer's review. Before mold building knock-out, professional DFM is submited to customer for approval. Guides and Interlocks. Safety requirements. Cooling system (Manifold and water connections). Hydraulic Manifold and connectors.