Automotive interior products-2K injection mold with hot runner system.
| SPECIFICATION | |
| Usage | Automotive interior products-2 komponents mold-2 shots mold |
| Mold type | Thermoplastic injection mold |
| Raw material | ABS / TPE |
| Finishing | Hard piece Polishing B1, soft piece texture MT# |
| Cavity No. | 1 and 1 Cav. |
| Construction | 2-plate mold of 2 shots, Slider |
| Demold mechanism | Slider actuated by angular guiding pin. |
| Injection | Hot runner system |
| Mold material | S7 ESR 48-52 HRC, Mold base LKM |
| Mold size | L500xW350xH450mm, |
| Components | DME standard components |
| Machine Tonnage | M/C 220 Tonnage-"L" type double injection machine |
| Cycle time | 45 sec, mold temperature 60°C. |
| Mold lifetime | 800,000 shots |
| FA lead-time | 7 weeks from order released |
| Delivery time | 15 weeks from order placed. |
| Automotive interior products-two shots mold.M/C 220 Tonnage-"L" type double injection machine. Ejector pins was DME standard type. 2 groups of ejection plates. Hot runner injection mould. Core side rotates and cavity side is fixed. Hard plastic is ABS, and soft plastic is TPE,Shore A 60, Material/steel were hardened by vacuum heat treatment . The mold were tested 4 times as well, before trial of every time, engineer should check all respects. during mold test, keeping good test record and setting-up parameters as to datasheet. Mold price was US$9.000,00, it was competitive price. the molding was automatic running for production. every shotting is with 2 shots at same time. On core side, 2 cavities are almost same with respective cavity.China low cost molds As a good mold making supplier in China, we provide good service to our customers by 2K molds, over-mold, over-molding, metal-installing mold,etc. , Mold Engineering Solution is according to customers' specification of injection machines. Mold trial is to be completed in similar press for mold validity. double shots mold, Sincerely yours! |
|
