Appliance cover China mold low cost mold making

Short Description:

Professional precision mold fabrication with good mold design. Professional mold trials and mold quality checking before mold delivery. Mold data , including mold drawings, 3D data, setting-up parameters, trial video, maintainance manu etc is to be submited to customers. Strict pilot running was completed for validity before mold delivery.

Usage: Appliance cover_China mold making

Mold type: Thermoplastic injection mold

Raw material: PS

Cavity No.: 1 Cav.

Demold mechanism: Slider is actuated by angular pillar pins.

Mold material: 1.2343 ESR 48-52 HRC, A/B plate, 1.2311, LKM standard mold base

Mold size: L450xW400xH471mm,

Send email to us

Product Detail

Product Tags

SPECIFICATION
Usage	Appliance cover_China mold making
Mold type	Thermoplastic injection mold
Raw material	PS
Finishing	Polishing B2, core side 400# paper.
Cavity No.	1 Cav.
Construction	2-plate mold with Slider
Demold mechanism	Slider is actuated by angular pillar pins.
Injection	Hot nozzel.
Mold material	1.2343 ESR 48-52 HRC, A/B plate, 1.2311, LKM standard mold base
Mold size	L450xW400xH471mm,
Components	HASCO standard, Z81/9/R1/4
Machine Tonnage	M/C 180 Tonnage
Cycle time	33 sec, mold temperature 40°C.
Mold lifetime	1,000,000 shots
FA lead-time	8 weeks
Delivery time	16 weeks since order placed.
Thermoplastic injection mold supplier thermoplastic injection mold made in China injection mold imported from china thermoplastic injection molding supplier mould and mold made in China Engineers & mold designers are qualifed on mold specification trainings. not only good design mold according to mold specification ,but also good fabrication as to mold design.Mold Engineers followed-up the project since order released, 4 times mold trials in total before mold delivery. 10 hour molding running was tested for mold validity. Mold checking list to check mold quality according to mold specification, double check if welding or not. welding is forbidden for all molds. if any necessary in welding, it must be done under customer's authorization. Mold documents of data is to be shipped together with mold pallet, including trial video of 3 shots at automatic running.Ejection pins checking were be on-spot to make sure every pin pushed smoothly. and every waterline keeps even flowing volum. Guides and Interlocks. Safety requirements. Cooling system (Manifold and water connections). Hydraulic Manifold and connectors. NEOK teams are looking forward to precisous order of mold building. Best regards.