Automotive interior products-Thermo plastic injection mold with hot nozzel.

Short Description:

slider insert was maded of material 1.2767 hardness HRC48-52, Cavity & cavity was made of material 1.2343 ESU, HRC 48-52, deviation 5 HRC between components sliding on each other. Good fitting & shut-off between sliders & core block.Precision machining by High-speed CNC machine.mold running was very smooth on automatic condition.

Usage: Auto_plastic part

Mold type: Thermoplastic injection mold

Raw material: PC+ABS

Cavity No.: 1 Cav.

Demold mechanism: Slider is actuated by angular pillar pins & cylinder..

Mold material: 1.2343 ESR 48-52 HRC, A/B plate, 1.2311, Mold base LKM

Mold size: L420xW380xH476mm,

Send email to us

Product Detail

Product Tags

SPECIFICATION
Usage	Auto_plastic part
Mold type	Thermoplastic injection mold
Raw material	PC+ABS
Finishing	Polishing A1, core side 600# sand paper.
Cavity No.	1 Cav.
Construction	2-plate mold with Slider x 4 positions
Demold mechanism	Slider is actuated by angular pillar pins & cylinder..
Injection	Hot nozzel.
Mold material	1.2343 ESR 48-52 HRC, A/B plate, 1.2311, Mold base LKM
Mold size	L420xW380xH476mm,
Components	HASCO standard, Z81/9/R1/4 type of water connectors
Machine Tonnage	M/C 180 Tonnage
Cycle time	30 sec, mold temperature 60°C.
Mold lifetime	1,000,000 shots
FA lead-time	7 weeks after Order.
Delivery time	14 weeks since order placed.
NEOK's Engineering team follow-up design rules as followed, 1. Mold identification Tag. 2. Pocket for mold identification Tag. 3. Mold painting. 4. Mold Base Design and Eyebolt 5. Guides and Interlocks. 6. Safety requirements. 7. Cooling system (Manifold and water connections). 8. Hydraulic Manifold and connectors. 9. Hot runner plug and connections design. 10. Micro switch connections design. 11. Ejection system. 12. Standards components. 13. Mold Design CAD files. The slider frame with a suppting racket of material 1.1050, it simplifed the mold frame to good design for cylinder.Good fitting among 4 sliders to get good quality of plastic parts. Matching of part line was less than 0.1mm. Sliders on 4 sides balances the different forces while mold plates closing. Good shut-off between slider,core and cavity blocks. 5 HRC of deviation between components which slides on each other. HASCO type of locating latch under sliders to positions. Electronic switch connectors for cylinder's safe stroke. thermoplastic injection mold supplier thermoplastic injection mold made in China injection mold imported from china thermoplastic injection molding supplier mould and mold made in China punch and Die made in China mold supplier in China mold & Die made in China Sincerely yours!