Automotive interior products-2K injection mold with hot runner system.

Short Description:

Automotive mold for automotive interior 2K mold. Tonnage-"L" type double injection machine.DME standard ejector pins is with 2 groups of ejection plates.Core side rotates and cavity side is fixed. Hard plastic is ABS, and soft plastic is TPE,Shore A 60,Material/steel were hardened by vacuum heat treatment 48-52 HRC. LKM mold base.

Usage: Core set half_machined_assembled_Automative injection mold

Mold type: Automative Thermoplastic injection mold

Raw material: PC+ABS

Cavity No.: 1 Cav.

Demold mechanism: Slider and ejection of pin & lifters.

Mold material: 1.2343 ESR 48-52 core block, 1.2767 HRC 48-52 sliders and lifters.

Mold size: L450xW350xH230mm,

Send email to us

Product Detail

Product Tags

SPECIFICATION
Usage	Core set half_machined_assembled_Automative injection mold
Mold type	Automative Thermoplastic injection mold
Raw material	PC+ABS
Finishing	Core side 600# sand paper.
Cavity No.	1 Cav.
Construction	2-plate with cold runner and subgate.
Demold mechanism	Slider and ejection of pin & lifters.
Injection	Hot runner transfers to Cold runner by subgate.
Mold material	1.2343 ESR 48-52 core block, 1.2767 HRC 48-52 sliders and lifters.
Mold size	L450xW350xH230mm,
Components	HASCO standard water connector, Z81/9/R1/4
Machine Tonnage	M/C 200 Tonnage
Cycle time	30 sec,
Mold lifetime	1,000,000 shots
FA lead-time	25 days
Delivery time	25 days
Parting line supporting wear plates, material 1.2510 HRC 58-62 to balance of mold halves closing. Slider's frame 1.2344, insert of slider, 1.2767 HRC 48-52, Different hardness deviation HRC 5, no grinding job by manual, no welding job on surfaces, no sharp corner; no shin steel shim. Engravings of part number, hardness, material information. HASCO water quick jigs. Good fitting between core and sliders & lifters. Locating latch under base of sliders. Slider and lifters were nitrided after well fitting.components runns smoothly during demolding,including ejection. low to medium volume insert molding injection molding production China prototype manufacturer in Dongguan Asia prototype manufacturer Rapid CNC Machining for Prototyping CNC milling prototyping CNC machined prototype plastic part NEOK's one of business is providing mold inserts and spare parts machined, delivery attached with material certificate of material, Hardness certifcate as welll as QC reports. Data format for inquiry, .dwg,.dxf,.stp,.x_t etc. Sincerely yours!