Electronic Static shielding cover stamping Die

Short Description:

size L320xW450xH220mm, Stamping progressive tool for Electronic Article production.Hardened Steel SKD11, SKH51.Strip material is Carbon steel..Punching speed is 180~200 RPM. Tolerance +/-0.005mm, Tool life time 20KK punchings. press 60T. Good quality and low-cost with short period of fabrication.

Usage: Electronic shielding cover

Tool type: Progressive stamping Die

Raw material_strip: Carbon Steel, thickness,0.6mm

Parts number per punch: 1 parts off per punching

Punch&Matrix_ material: SKD11, SKH51 steel.

Tool size: size L320xW450xH220mm,

Send email to us

Product Detail

Product Tags

SPECIFICATION
Usage	Electronic shielding cover
Tool type	Progressive stamping Die
Raw material_strip	Carbon Steel, thickness,0.6mm
Parts number per punch	1 parts off per punching
Construction	2-plates design with 1 stripper plate
Punch&Matrix_ material	SKD11, SKH51 steel.
Tool size	size L320xW450xH220mm,
Components	MISUMI STD guiding system
Press Tonnage	M/C 60T press,
Stamping speed	80-120 rpm
Tool lifetime	10KK punching
FA lead-time	25 dyas
Delivery time	35 days
Progressive stamping Die made in China,connector tooling,punch and Die. NEOK engages in business of progressive stamping Die, sheet froming, blanking and bending. All punches was treated by vaccum & cryogenic to get a long lifetime , avoiding of crack.Processing tolerance +/-0.002mm by Wire-cutting machine made in Japan & PG grinding. Article tolerance within +/-0.005mm, it normally takes 3 times of trials before tool delivery. Punch and matrix material, VHM, 1.2379, ASP23, SKH51, SKD11, etc. Tool standard, FIBRO、AGAGHON、RABOURDIN,MISUMI、PUNCH、PROGRESSIVE、DANLY、etc.for overseas tooling services. it is easy to maintain tools or replace standard components during mess production. Stamping Die tools, progressive stamping Die and tool,punch and Die made in China,terminal parts PVD coating machined spare parts,DLC coating machined spare parts Low cost of fabrication and on time delivery with good quality in progressive tool. 24 hour inquiry service. Exclusive tool engineer is designated to the project's following-up. tool design in house. DFM, 1 day, >>> layout design,2 days >>> tooling drawings,3 days, >>> tool fabrication, 12 days, >>> tool trial, 3 days >>>tool delivery, 2 weeks after T1 trial. 10 samples free for custimer's approval x 3 times of trials with inspection report. Stamping sucess for custimers. DLC coating machined parts,punch and Die spare parts Ceramic punch and ceramic pin gauge,carbide punch and Die DLC coating punch and Die insert,DIN standard punch and matrixes sets. Best regards! NEOK's sales team.